The Greenhouse dedicated light
The Hortimol HPLED Full spectrum FSS frame is a low-consumption frame whose spectrum and dimensions have been specially designed for greenhouse use to complement sunlight. They can also be used indoors for surfaces ranging from 120x60 (pro) to 150x80 (eco).
- Fanless design
- Low-profile design for use in greenhouse
- Fit one 120x60cm
- Can be daisy-chained
Flower Special Spectrum
What it needs where it's needed
This spectrum has been specially developed to be as efficient as possible during flowering periods, it is also suitable for tropical plants. Its two peaks in the red at 630 and 660 provide flowers with all the energy they need to develop quickly and flourish. The other components of the spectrum are left in the background in order to minimize consumption while illuminating the plants from all fronts. Thus the blue content 450 is barely higher than the proportion of deep infrared 730. It is in the same spirit that the Full Spectrum sway was done, just what is needed where it is needed. to save power and concentrate it preferentially around red and infrared.
As a result your plants are blooming like never before, and you will be delighted.
Flowers, but not only
If this spectrum turns out to be the king of flowering, however, we have made sure that its energy balance also allows its use for short growths. So you will find the same type of growth as under your old HPS DualSpectrum lamps, which is an advantage when you spend little time in the vegetative phase since it becomes optional to change the lighting for this short period.
Spectrum | FSS (Flower Special Spectrum) |
Efficacy | 2.7 µmol/j |
PPF | 891 µmol/s |
Input voltage | 220-230V, 50-60Hz |
Input current | 2.3A |
Input power | 330W |
Footprint | 120x60cm (pro) to 150x80cm (eco)* |
Light source | OSRAM LED, Sunribio IR, LM-80 |
L70 Rating | >78000 h |
L90 Rating | >54000 h |
Thermal management | Passive |
Dimmable | 0-10V |
Dimensions | 1000x129x199.5mm |
Weight | 8.3 kg |
Ingress Protection | IP65 |
Certification | ETL, DLC, UL8800, CE |
* The surfaces are given as an indication for an installation with entirely artificial lighting. The height of the lamp and the light needs of the plants must be taken into account to determine the really usable surface. This can be lower or higher depending on the type of installation and use